Installing a Stair Chair Lift

Install a stair chair lift at your home, it's easy to do. But if you don't know how to is possible to make mistake. So, if you want to install it perfectly, this articles may help you.

The installation of a stair chair lift will make it possible for disabled individuals to navigate multiple story residences. Without a stair lift, individuals with physical challenges and disabilities are often confined without access to upper levels and lower levels of a residence. In some instances, the stair lift is essential for disabled persons who can walk but have problems with climbing stairs. Choosing and installing the proper stair left for any residence should be contingent upon a number of factors. One of the primary considerations should be the frequency of use. Determine the weight capacity of the stair lift and the size of the chair. The average stair lift can operate with weights up to 350 lbs. Installing a stair lift for a person confined to a wheelchair should consider how smoothly the person transfers from the stair lift to a wheelchair at the top or bottom of the stair chair lift.

Step 1
Unpack the boxes and organize the components according to where they will be installed. Some components will be installed at the top of the stairs, and other components will be installed at the bottom of the stairs.

Step 2
Attach the brackets to the track channels. The bottom track should be installed first, then the middle, and then the top track.

Step 3
Fasten the track brackets onto the channel, and place the lower bracket onto the bottom of the stairs. Tighten by hand only when fastening the bolts on the track bracket to the channel. Join the track sections with the splice bars. Make sure the screws do not protrude past the splice bar.

Step 4
Slide the upper splice bar to the lower splice bars. Tighten the splice bars, and make sure the brackets are secure.

Step 5
Install the seat after the track has been tested and moves smoothly up and down the stairs.

If a member of your household has mobility problems, a stair lift can be a great addition to your home. It allows you to give this person a break from the stress that stairs can have on the joints and it doesn’t take much room or renovation as a ramp or elevator might. Installing your stair lift can be a little tricky, but just remember, it’s only a one-time operation.

1. Purchase your stair lift. You should be able to find one at a store that sells medical supplies. (Often these shops are located in or near hospitals.) If not, you can also order one online. Be sure to measure your flight of stairs before purchasing to ensure that the track is the proper length.

2. Lay the lower track on the stairs and attach the brackets to the steps with the screws that came with your stair lift. In most cases, there will be a bracket at the top of the stairs, one at the bottom and one or more somewhere in the middle. Be sure to lay the track on the wall side of the stairs, not the railing side, so you don’t block people walking up and down.

3. Install the call box wiring. Your lift will come with a wire that will alert it to come down when it is at the top of the stairs. This cord will need to be fed through the track from the bottom to the top. Be sure to feed it through against the wall and underneath the track so that it stays out of the way. Your track may have a specific place for it to clip on to the underside.

4. Now, lay the upper track on top of the lower track (your seat’s base will attach between the two tracks). It should slide onto the lower track and screw in. Then you can connect it to the brackets you’ve already attached to the stairs.

5. Install the chain. It will serve as a pulley to move the chair up and down, kind of like it does on a bike. The chain will fit securely in the center of the track, with half on the left side and half on the right. Once it is fed correctly, it will move without resistance.

6. Feed the seat’s power cable through its slot in the track. Since this cable moves with the chair, again, you will want to make sure it can move without getting stuck. If not, it could pull out of the track, which could be dangerous.

7. Attach the seat to the track using the supplied screws. Put it in a position that will be comfortable for the user. Don't have the user try it out until it is securely attached.

8. Plug the main power cable into the bottom of the track, and plug the other end into the wall outlet.

Now you can use stair chair lift at your home.

Articles Source :
http://www.essortment.com/install-stair-lift-63189.html
http://www.ehow.com/how_4558471_install-stair-lift.html